2015 Husqvarna 555FX
Husqvarna 555FX is a very powerful clearing saw developed for full time spacing tasks in tough conditions. The X-Torq® engine provide raw power, rapid acceleration and excellent fuel economy. Short tube and bevel gear angled 24 degrees simplifies directional felling in dense forests. Very low vibrations thanks to LowVib®. Delivered with Balance XT harness.
- X-Torq® engine: The X-Torq® engine design reduces harmful exhaust emissions by up to 60% and increases fuel efficiency by up to 20%.
- Smart Start®: The engine and starter have been designed so the machine starts quickly with minimum effort.
- Adjustable handle bar: Adjustable and ergonomically designed handlebar for best comfort.
- Thumb-operated throttle: Thumb-operated throttle for efficiency and precision control. Reduces strain on the hand.
- Easy blade switch: Magnetic locking pin holder facilitates blade switch.
- LowVib®: Effective anti-vibration dampeners absorb vibration, reducing stress on the user’s arms and hands.
- Balance XT: Ergonomic harness with broad back support, shoulder straps and hip belt that distributes the load over a larger area. Adjustable back plate for perfect fit.
- Air Purge: Removes air from carburetor and fuel system for easy starting.
- Cylinder displacement: 53.3 cc
- Power output: 3.8 hp
- Maximum power speed: 9000 rpm
- Fuel tank volume: 37.2 fl oz
- Fuel consumption: 480 g/kWh
- Fuel consumption: 2.95 lb./h
- Idling speed: 2800 rpm
- Spark plug: NGK BPMR7A
- Electrode gap: 0.02 in.
- Torque, max.: 3.5 Nm/6900 rpm
- Clutch engagement speed: 4100 rpm (±120 rpm)
- Maximum rpm output shaft: 10500 rpm
- Output shaft thread: M12x1.75V
- Lubricant type (bevel gear): Biodegradable grease
- Exhaust emissions (CO average): 350 g/kWh
- Equivalent vibration level (ahv, eq) left / right handle: 2.1/2.3 m/s²
- Sound pressure level at operators ear: 103 dB(A)
- Sound power level, guaranteed (LWA): 117 dB(A)
- Gear ratio: 1:1.29
- Drive gear angle: 24 deg.
- OEM Saw blade: Scarlett 225-24
- OEM Harness: Balance XT
- Weight (excl. cutting equipment): 19.6 lb.
- Tube length: 53.35 in.
- Tube diameter: 1.38 in.
- 3.8 hp
- 53.3 cc
- 19.6 lb.